Painting Supplies - Page 3 - Super Savings! Save up to 36%

Super Savings! Up to 36% off on Painting Supplies at Outdoor Resources, Page 3. Top brands include Interlux, Seaward Products, Sea Hawk, Fiberglass Supply Depot Inc., TUFF Coat, Pettit Paint, FSD, Ducky, Moeller, Awlgrip NA, BRP, Aquagard, WEST SYSTEM, & Awlgrip. Hurry! Limited time offers. Offers valid only while supplies last.

Interlux Micron 66 Gallon - YBA473G - Black
By Interlux
In Stock
You Save: 21%

mpn: YBA473G, ean: 0081948164733,

4.9 out of 5 stars with 136 reviews
Interlux Micron 66 Antifouling Boat Bottom PaintThe top rated Interlux Micron 66 is formulated to provide a level of anti-fouling protection not previously available in any paint. Micron 66 provides the best anti-fouling performance in the harshest fouling conditions for 2 YEARS and beyond. Over time Micron 66 polishes and becomes smoother with usage, reducing your boats drag , fuel consumption, and minimizes sanding time during reapplications. Micron 66 is designed for professional application

Whale Marine Whale Seaward 11 Gal Hot Water Heater W/rear Heat Exchanger
By Seaward Products
In Stock

mpn: S1100, ean: 0766478947703,

4.1 out of 5 stars with 84 reviews
Feature aluminum tanks and hold down brackets, dual wall heat exchangers, and ignition protection. Galvanized steel exterior.Seaward Products S1100, SWDS1100.

Sea Hawk Cukote Red Gl 3441GL
By Sea Hawk
SKU: #95-3441GL
In Stock
You Save: 2%

sku: 95-3441GL, mpn: 3441GL, ean: 0811577010961,

4.7 out of 5 stars with 99 reviews
Cukotes high loading of cuprous oxide makes this formulation a top performer, even in the most severe fouling areas. As an ablative, self-polishing coating, there is no buildup of paint over time. Your hull's underwater surface remains smooth and clean. Cukote copolymer can also withstand removal from water without affecting its antifouling properties. Highest Grade of Cuprous Oxide Available (More Potent Active Ingredient) Harder Self-Polishing Finish (Lasts Longer on Higher Speed Vessels)

White Gelcoat - NO Wax - Pint with 15cc Hardener (MEKP)
By Fiberglass Supply Depot Inc.
In Stock

mpn: 4333814916,

4.8 out of 5 stars with 102 reviews
White Gelcoat NO Wax Pint with 15cc Hardener (MEKP)Exterior. White. Comes with Hardener. MEKP Chart. MEKP Measuring Cup.

TUFF Coat UT-100 Olive-Gallon Olive
By TUFF Coat
In Stock

mpn: UT-100 Olive, Gal, ean: 0814461000055,

4.2 out of 5 stars with 9 reviews
Worlds #1 rubberized marine non-skid boat and dock coating, which is simple to apply by yourself or contractor. Used on pontoon boats, flats boats, house boats, fishing boats, aluminum boats, ferry's and docks with amazing success. TUFF Coat is a single component with no mixing. It is water based, non hazardous, extremely durable and UV/chemical resistant. Coverages: 45 sq. Ft. Per gallon TUFF Coat is a us based company that has been manufacturing non-skid products for the last 20 years with an

Interlux Marine Micron CSC Boat Bottom Anti-Fouling Paint Black GALLON
By Interlux
SKU: #2652812
In Stock
You Save: 36%

sku: 2652812, mpn: INT5583G, ean: 0081948155830,

4.1 out of 5 stars with 108 reviews
Hard antifouling. Long lasting. Multi-season formula. Ablative, non-sanding, no paint buildup. The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). All that is needed to reactivate the paint in the spring is

Vivid, Blue, Gallon - Pettit Paint
By Pettit Paint
SKU: #93-1261G
In Stock
You Save: 2%

sku: 93-1261G, mpn: 1261G, ean: 0725469001688,

4.6 out of 5 stars with 96 reviews
Pettit Vivid Ablative Marine PaintNow you can have the brightest colors, the blackest black and the whitest white available in a bottom paint. Vivid's attributes go far beyond its beautiful vibrant colors, for it also provides excellent multi-season, dual biocide antifouling protection under all conditions. Vivid's new hybrid technology incorporates all the benefits of both ablative and hard paints in one superior product. Its hard, smooth surface withstands trailering and is easily burnished

FSD Polyester Resin w/Hardener for Laminating Fiberglass mat, biaxle, Cloth (Quart)
In Stock

mpn: 4333815276, ean: 0819794020022,

4.5 out of 5 stars with 104 reviews
Includes 15cc Hardener Includes measuring cup Includes MEKP Chart.

Ducky D-1004 Water Spot Remover - Gallon
By Ducky
In Stock
You Save: 14%

mpn: 3004.3362, ean: 0656176100695,

4.5 out of 5 stars with 101 reviews
Ducky Water Spot Remover 1 Gallon is a signature product, the most recognizable and sought after product of its kind. This product was developed specifically for the removal of hard water spots, a problem unique to itself. Quick and easy to use, spray on, wipe off. Non abrasive, non toxic, no rinse necessary.1 Gallon Duck Hard Water Spot Remover. Designed specifically for hard water spot removal. Quick and easy to use. Spray on, wipe off, no rinsing required. Non-abrasive and non-toxic.

Moeller Mercury Engine Spray Paint, Black
By Moeller
In Stock

mpn: 3001.1569, ean: 0039729253503,

4.3 out of 5 stars with 126 reviews
12 oz Moeller Mercury Phantom Black Touch up Paint. Matches your engine's original color.For total engine coverage, use Moeller's quick drying Engine Paint. This heat and solvent resistant acrylic lacquer is formulated for the extended staying power boat engines need. Color matched to your engines original color. For Use on all outboard and inboard engines, sterndrives and lower unit applications. 12oz spray can.This item is not for sale in Catalina Island.

TUFF Coat MP-10 1 Gallon Primer Kit
By TUFF Coat
In Stock

mpn: MP-10 Primer, Gal, ean: 0814461000499,

4.4 out of 5 stars with 146 reviews
Single component, water based self etching primer. Used on bare metal and aluminum in conjunction with Tuff coat marine non-skid coating. Coverages are 250 sq. Ft. Per gallonWater based. Non hazardous. Made in the USA. Low voc/low odor.

By Awlgrip NA
SKU: #98-G8003G
In Stock
You Save: 4%

sku: 98-G8003G, mpn: G8003G, ean: 0841006002083,

4.8 out of 5 stars with 139 reviews
Polyester Urethane TopcoatExcellent color retention and chemical resistance For use above the waterline onlyCan be applied by spray or brush/rollHigh Performance Polyester Urethane Topcoat. Longest lasting color, gloss, and chemical resistance. For use above the waterline only. Can be applied by spray or brush/roll. Custom Colors available.

SKU: #0777175
In Stock
You Save: 10%

sku: 0777175, mpn: 777175, ean: 0745419304362,

4.0 out of 5 stars with 127 reviews
Evinrude Johnson Metallic Blue Touch Up Spray Paint. Matches your engine's original color. Model Year Evinrude 1992-2006 Johnson 9.9 2003-2005BRP. 777175.

Aquagard Waterbased Anti-Fouling Bottom Paint - 1Gal - Teal
By Aquagard
SKU: #38709
In Stock
You Save: 5%

sku: 38709, mpn: 10105, ean: 0690528380274,

4.0 out of 5 stars with 23 reviews
AQUAGARD® BOTTOM PAINTBottom PaintWaterbased Anti-Fouling Marine paints for Fiberglass & Wooden boats. Ablative action repels barnacles & other growth Fast drying Water based paint rolls on easily Great value with outstanding results Soap & water clean-up Exceeds V.O.C. standards Controlled leach out Non-toxic fumes Also great for use on inflatable boats without the use of primer! Plastic containers increase shelf life U.S. EPA approved Product : AQUAGARD WATERBASED BOTTOM PAINT GALLON TEAL

Pettit Paint A788G Splash Zone, 2 Gallon Kit Made by Pettit Paint
By Pettit Paint
SKU: #93-A788G
In Stock

sku: 93-A788G, mpn: A788G,

4.2 out of 5 stars with 31 reviews
Pettit Paint Part #A788GA-788 Splash Zone Compound Extremely hard, abrasion and impact resistant, two-component epoxy for marine use only. Provides protection against corrosion of metals and erosion and deterioration of concrete and wood above or below the waterline in splash zones. Also can be used as a coating repair of boat hulls and buoys or bridge abutments and on any surface subject to corrosion in salt or fresh water. Not for use in potable water. Used for patching and grouting

Moeller Marine Paint Hi Gloss Clear Coat Lacquer
By Moeller
SKU: #2141832
In Stock

sku: 2141832, mpn: 25519, ean: 0039729255194,

4.5 out of 5 stars with 82 reviews
12 oz Moeller paint clear coat. Increases luster and depth. Formulated for the marine environment. For use on all outboard & inboard engines, stern drive and lower unit applications. Enhanced U.V. protectionMOELLER 025519, MOE025519.

White Gelcoat with Wax - Pint with 15cc Hardener (MEKP)
By Fiberglass Supply Depot Inc.
In Stock

mpn: 4333814917,

4.2 out of 5 stars with 107 reviews
White Gelcoat with Wax Pint with 15cc Hardener (MEKP)Exterior. White. Comes with Hardener. MEKP Chart. MEKP Measuring Cup.

WEST SYSTEM 205B Fast Hardener, 0.86 Quart
In Stock
You Save: 10%

mpn: 205B, ean: 0811343010577,

4.5 out of 5 stars with 51 reviews
Highly trusted by boat-builders, WEST SYSTEM Epoxy is ideal for use as an ultra-tough waterproof coating, a high-strength, gap-filling adhesive or an easily sanded surface filler. The Resin works in conjunction with a variety of WEST SYSTEM Hardeners, Fillers and Pumps for a wide range of applications.WEST SYSTEM 205B, WSY205B.

FAST HARDENER #205 .94 Gallon
SKU: #2961088
In Stock
You Save: 7%

sku: 2961088, mpn: 205C, ean: 0811343010584,

4.5 out of 5 stars with 112 reviews
FAST HARDENER produces rapid cure. Mix with #105 resin 5:1 for rigid, high strength, rigid moisture resistant solid . Pot life of 10 to 15 minutes at 70°F. Use #301 mini pumps. Size: .94 Gallon.WEST SYSTEM EPOXY PRODUCTS 205C, WSY205C.

Awlgrip G3010G Awlcat #2 Spray Topcoat Converter Gallon
By Awlgrip
In Stock

mpn: G3010G, ean: 0841006090745,

4.1 out of 5 stars with 8 reviews
G3010 Awlcat #2 Converter: Use in Awlgrip, Awlcraft 2000 and Awlcraft SE topcoats.H3002 Awlcat #3 Converter: Used in Awlgrip (G and H line topcoats) when brushing and rolling.G3010: Awl-Cat #2 converter is for use in Awlgrip and Awlcraft 2000 topcoats when spraying.. H3002: Awl-cat #3 converter is used when brushing and rolling Awlgrip (G and H line topcoats). Mix by volume 2 parts Awlgrip Topcoat base component with 1 part Awl-cat #3/H3002 brushing converter until smooth, homogenous mixture is

Viewing Page 3 of 4

View more products in Maintenance Supplies.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - All Rights Reserved.